Photos show Dentron MLA2500 converted to Six meters
last update Feb 2023
Starting out with new Aluminum plate floor on RF side of the Dentron MLA ampilifer
Power supply upgrade using Harbach capacitor and diode board.
Mouser # has these https://www.mouser.com/ProductDetail/612-RB141D1000-116
---------------------------------------------------------
A warning, The timer maximum setting is 120 seconds
A 3cx800 requires 180 seconds
labeling on diode board "T" = top "B" = bottom
---------------------------------------------------------
---------------------------------------------------------
---------------------------------------------------------
---------------------------------------------------------
9 April 2022 finishing up HV on power supply with new capacitor/diode board. 2400 Vdc no load, Success!
---------------------------------------------------------
These pieces were LDPE, lower melt point then PTFE, epoxed in
Don't use LDPE for material that might contact tube, temperature rating or in other words, it smells
---------------------------------------------------------
A Svetlana 3cx800 was used for testing
Filament voltage a 13.4Vac
500 watts out
---------------------------------------------------------
Feb 2023
---------------------------------------------------------
Place holder for additional photo
---------------------------------------------------------
Here's picture of TS850 at V26P
During the contest 5629 qso's were made on the 850 zero on the K2
#1 world 2003 LP ARRL SSB DX
73 W5AJ
# Call Score QSOs LOW Power Class
1 V26P (W5AJ, op) 5,420,727 . . 5,629 . . 321 S B V2 NA North Texas Contest Club
2 V26DX . . . . . . 5,251,914 . . 6,186 . . 283 M2X B V2 NA Frankford Radio Club
3 6Y8Z . . . . . . 4,346,298 . . 4,878 . . 297 MS B 6Y NA Society of Midwest Contesters
4 VP9/W6PH . . . . 4,344,684 . . 4,583 . . 316 S B VP9 NA Yankee Clipper Contest Club
5 V31QQ . . . . . 3,922,539 . . 4,259 . . 307 MS B V3 NA Yankee Clipper Contest Club
---------------------------------------------------------
have fun and GL with the DX